ReadyBoost can speed up your computer by using storage space on most USB flash drives and flash memory cards. When you plug a ReadyBoost -compatible storage device into your computer, the AutoPlay dialog box offers you the option to speed up your computer using ReadyBoost . If you select this option, you can choose how much memory on the device to use for this purpose.
When you set up a device to work with ReadyBoost , Windows shows you how much space it recommends you allow it to use for optimal performance. For ReadyBoost to effectively speed up your computer, the flash drive or memory card should have at least 1 gigabyte (GB) of available space. If your device doesn't have enough available space for ReadyBoost , you'll see a message telling you to free some space on the device if you want to use it to speed up your system.
You can enable or disable ReadyBoost for a specific flash drive or other removable storage device. For more information, see Turn ReadyBoost on or off for a storage device.
Here are some tips on what to look for when selecting a USB flash drive or flash memory card to use with ReadyBoost :
The minimum amount of available space recommended for ReadyBoost to effectively speed up your computer is 1 GB.
For best results, use a flash drive or flash memory card with available space of at least double the amount of memory (RAM) in your computer, and preferably four times as much memory. For example, if your computer has 1 GB of RAM and you plug in a 4 GB USB flash drive, set aside at least 2 GB on the flash drive to get the best performance gain from ReadyBoost , and preferably the entire 4 GB. How much memory you need depends on how you use your computer. Keeping a lot of programs open at once uses more memory.
Give ReadyBoost 2 GB to 4 GB of space for best results on most computers. You can reserve more than 4 GB of space for ReadyBoost on most flash drives and flash memory cards. (Storage devices formatted with the older FAT32 file system can't store more than 4 GB.) You can use a maximum of 32 GB of available space on any single removable storage device with ReadyBoost and up to 256 GB total per computer (by inserting up to eight USB flash drives or flash memory cards into the same computer).
To work with ReadyBoost , a USB flash drive must support USB 2.0 or higher. Your computer must have at least one free USB 2.0 port where you can plug in the flash drive. ReadyBoost works best if you plug the flash drive into a USB port directly on the computer, rather than into an external USB hub shared with other USB devices.
If you want to be sure a USB flash drive works with ReadyBoost , look for a note from the manufacturer that the flash drive is "Enhanced for ReadyBoost ." Not all manufacturers list this on their packaging. If there is no mention of ReadyBoost compatibility, the flash drive still might work with ReadyBoost .
There are many different kinds of flash memory cards, such as CompactFlash and Secure Digital (SD) memory cards. Most memory cards work with ReadyBoost . Some SD memory cards don't work well with ReadyBoost due to issues with the SD card interface. ReadyBoost will display a warning message if you attempt to use one of these cards.
If your computer has a hard disk that uses solid-state drive (SSD) technology, you might not see an option to speed up your computer with ReadyBoost when you plug in a USB flash drive or flash memory card. You may instead receive the message, "Readyboost is not enabled on this computer because the system disk is fast enough that ReadyBoost is unlikely to provide any additional benefit." This is because some SSD drives are so fast they're unlikely to benefit from ReadyBoost .
In some situations, you might not be able to use all of the memory on your device to speed up your computer. For example, some flash memory devices contain both slow and fast flash memory, but ReadyBoost can only use fast flash memory to speed up your computer.
Windows ReadyBoost can use storage space on some removable media devices, such as USB flash drives, to speed up your computer. When you insert a device with this capability, the AutoPlay dialog will offer you the option to speed up your system using Windows ReadyBoost . If you select this option, you can then choose how much memory to use for this purpose. However, there are some situations where you may not be able to use all of the memory on your storage device to speed up your computer.
Some universal serial bus (USB) storage devices contain both slow and fast flash memory, and Windows can only use fast flash memory to speed up your computer. So if your device contains both slow and fast memory, keep in mind that you can only use the fast memory portion for this purpose.
The recommended amount of memory to use for Windows ReadyBoost acceleration is one to three times the amount of random access memory (RAM) installed in your computer. For instance, if your computer has 512 megabytes (MB) of RAM and you plug in a 4 gigabyte (GB) USB flash drive, setting aside from 512 MB to 1.5 GB of that drive will offer the best performance boost. The minimum size for any USB flash drive to work with Windows ReadyBoost is 256 MB.
You can enable or disable Windows ReadyBoost for a specific flash drive or other removable storage device. For more information, see Turn ReadyBoost on or off for a storage device.
Here are some tips about what to look for when purchasing a USB flash drive you plan to use with Windows ReadyBoost :
Make sure there is at least one free USB 2.0 port on your computer where you can plug in the flash drive (preferably not on an external USB hub shared with other USB devices).
Look for a note from the manufacturer that the flash drive is Windows ReadyBoost Compatible. Not all manufacturers list this on their packaging.
If the flash drive is not labeled as compatible with Windows ReadyBoost , check its specifications to see if it is capable of reading and writing data fast enough. The speed requirements for Windows ReadyBoost are at least 2.5 MB per second throughput for 4 kilobyte (KB) random reads and 1.75 MB per second throughput for 512 KB random writes.
A flash drive may appear to meet these requirements, but Windows Vista still may not detect the device as ReadyBoost -compatible if its rated speed measures sequential performance instead of random performance, and if performance is not consistently fast across the entire flash drive.