Project to a wireless display with Miracast

Miracast is a wireless technology your PC can use to project your screen to TVs, projectors, and streaming media players that also support Miracast. You can use this to share what you’re doing on your PC, present a slide show, or even play your favorite game on a larger screen.

Get your devices ready

If your PC came with Windows 8.1 or Windows RT 8.1 and your wireless display supports Miracast, you’re ready to add the wireless display to your PC to complete the connection, and start projecting.

However, if you upgraded your PC from an older version of Windows, you'll need to make sure your PC supports Miracast and is ready to project. Also, if the display you'll project to doesn’t support Miracast, you’ll need to set up the display by adding an extra piece of hardware to it before you can start projecting.

Show all

To get an upgraded PC ready to project

To help avoid problems projecting, make sure your PC supports Miracast and that it has the most current drivers.

Check if your PC supports Miracast

  1. Swipe in from the right edge of the screen, and then tap Devices.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Devices.)

  2. Tap or click Project. If you see Add a wireless display, your PC supports Miracast.

    Link for Add a wireless display on Project

    If your PC doesn’t support Miracast, you can try to project with a wired connection. For more info, see Connect a second monitor or projector.

Get current drivers for your PC

A driver is software that a device uses to work with your PC. If you upgraded your PC from an older version of Windows, you should get the latest drivers available for your PC. There are two ways to get them.

To set up a display that doesn’t already support Miracast

If the device you're projecting to doesn’t support Miracast, then you’ll need a Miracast adapter (sometimes also called a dongle) that plugs into an HDMI port on your display device. The adapter lets your PC communicate wirelessly with the display device.

A variety of manufacturers offer Miracast adapters, such as the ActiontecScreenBeam Pro Wireless Display Receiver and the NetGearPush2TV (PTV3000) Wireless Display Adapter. Follow the manufacturer’s instructions to connect the adapter.

You should also update the firmware on your adapter by going to the Support section of the manufacturer's website, searching on your specific device, and following their instructions to download and install that firmware. You can also check the Windows Store to see if there’s an app that'll update the firmware on your adapter.

Add the display to complete the connection

With your PC and display ready to project, you need to add the wireless display to your PC. Both devices need to be within range, which usually means that they're in the same room.

To add a wireless display to your PC

  1. Swipe in from the right edge of the screen, and then tap Devices.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Devices.)

  2. Tap or click Project, and then tap or click Add a wireless display.

  3. Choose the wireless display in the list of devices found, and follow the instructions on the screen.

Project your screen to a wireless display

After you add the wireless display to your PC, you can project your screen to it and change what you see on each screen.

To project your screen

  1. Swipe in from the right edge of the screen, and then tap Devices.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Devices.)

  2. Tap or click Project, and then tap or click the wireless display you want.

To choose what you see on each screen

  1. Swipe in from the right edge of the screen, and then tap Devices.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Devices.)

  2. Tap or click Project, and then choose one of these options:

    • PC screen only. You’ll see everything on your PC. (When you're connected to a wireless projector, this option changes to Disconnect.)

    • Duplicate. You’ll see the same things on both screens.

    • Extend. You'll see everything spread over both screens, and you can drag and move items between the two.

    • Second screen only. You’ll see everything on the connected screen. Your other screen will be blank.

Disconnect from a wireless display

If you move your PC beyond the range of the wireless display (such as to another room), or if you make your PC sleep or hibernate, the two devices will disconnect. You can also disconnect the wireless display manually.

  1. Swipe in from the right edge of the screen, and then tap Devices.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Devices.)

  2. Tap or click Project, and then tap or click Disconnect.

Fix problems

You can solve many problems by installing the latest drivers for your PC and the latest firmware for your wireless display or Miracast adapter. For more info about installing drivers on your PC, see Download and install drivers. To update firmware on your wireless display or adapter, go to the Support section of the manufacturer's website, search on your specific device, and follow their instructions to download and install that firmware. You can also check the Windows Store to see if there’s an app from the manufacturer of your wireless display or Miracast adapter that updates firmware.

Here are a few more steps to try if you continue to experience problems.

Show all

If you can’t add or connect to the wireless display

If you can't add the wireless display or adapter, wait for it to become ready and then try again. If that doesn’t work, try restarting your PC and the wireless display or adapter.

If your PC won't connect to the display, try removing and then adding it again.

  1. Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, click Settings, and then click Change PC settings.)

  2. Tap or click PC and Devices, and then tap or click Devices.

  3. Tap or click the wireless display, and then tap or click Remove Device.

  4. Swipe in from the right edge of the screen, and then tap Devices.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Devices.)

  5. Tap or click Project, and then tap or click Add a wireless display.

  6. Choose the wireless display in the list of devices found, and follow the instructions on the screen.

If the text on your display is fuzzy or images stutter

Try changing the screen resolution on your PC.

Note

  • Projecting fast-action games to a wireless display might not work well.

  1. Swipe in from the right edge of the screen, and then tap Search.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Search.)

  2. Enter Screen resolution in the search box, and then tap or click Display settings.

  3. Use the Resolution slider to choose a different screen resolution.

If audio continues to play on your PC

First, disconnect the display and then reconnect it. Then, check that the display is selected as your default audio device.

  1. Swipe in from the right edge of the screen, and then tap Search.
    (If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Search.)

  2. Enter Sound in the search box, and then tap or click Sound.

  3. Tap or click Playback, and make sure the Miracast wireless display is selected as the default device.

    For more info about sound problems, see No sound in Windows.